Wednesday, October 5, 2016

Full Steel Turf Toe Insoles


Full Steel Turf Toe Insoles for Men and Women: Pain Relief and Prevention from Turf Toe

Full Steel, Turf Toe Insoles are recommended by foot health professionals because they are ideal for preventing Turf Toe: soft tissue injury or a ligament strain that affects the big toe joint, which is typically caused from jamming the big toe or the constant push off movement when running or jumping – movements that often extend the big toe’s normal range of motion. These insoles will not only help prevent Turf Toe, but also provide stability to reduce discomfort from ball of foot pain and arthritis pain. They also combine the benefits of a special spring steel insert with the cushioning of a padded top. The Full Steel, Turf Toe Insoles are also perfect for wearers who require a rigid or semi-rigid shock absorbing footbed.

The steel acts as a means of immobilizing the toe joint to prevent it from bending during walking and sports, thus aiding the healing process. These insoles combine the benefits of a special spring steel insert with the cushioning of a padded top. Used to prevent and correct metatarsophalangeal(M.P.) joint injuries.

These are also puncture resistant insoles.  They are extremely light and comfortable, weighing only slightly more than a regular non-puncture resistant insole, and can be worn continuously in your footwear or only occasionally as the need for extra protection is required. They can be used in many types of regular non-safety footwear in place of any existing insole that has been provided with the footwear.
Puncture resistant insoles have many suggested applications for use, including but not limited to, occasional use opportunities in factories and workplaces where safety policy dictates that penetration resistant footwear protection must be worn by employees and visitors. Examples of specific applications where footwear penetration protection is highly recommended are;
in the tire recycling industry,
renovation and construction industries,
metalworking,
medical first responders,
sanitation and landfill sites,
hunting and fishing,
any time there is a risk of contact with a sharp object.

The Full Steel Turf Toe Insole has these features:

Helps immobilize the big toe joint to keep it from extending from its normal range of motion
Helps stabilize the foot to minimize pain from foot arthritis and Metatarsalgia (ball of foot pain)
Used to avert and correct M.P. (Metatarsophalangeal) joint injuries.
Packaged per pair
Laser cut spring steel .020″ thick
1/8″ durable felt
Sizes of Steel Shoe Insole: Men’s 6-13 Women’s 5-12

Teri Green

Atlas Biomechanics

Thursday, August 4, 2016

Hockey Orthotics ( Ice Skate Arch Supports ) and Gait Cycle

Hockey Skate Orthotics

Orthotics in hockey ice skates are used to control the ankle, foot and knee. In the foot, it especially controls the subtalar, midtarsal and ankle joints. If any of these joints are not in their most efficient positions, then the ice skater will not have the most effective leg power.

The typical hockey skater’s lower extremities never goes through a complete gait cycle. They ideally should have limited pedal mechanics between midstance and the beginning of propulsion, with slight knee flexion during the entire contact phase. When initiating a turn, an ice skater will maintain their control by directing the inside knee medially and transferring the load inward to the foot’s medial edge. This is done by internally rotating the tibia, causing a closed kinetic chain pronation of the foot which transfers the pressure through the skate boot on to the blade’s inside edge.

The higher level hockey skater has a more subtle dynamic and the reverse is true for the beginner. When an ice skater has an over pronated or unstable foot structure, they may have a more difficult time turning as the medial arch of the foot may collapse within the skate boot before the edging force can be transferred.

Some indications you may need a hockey ice skate orthotic arch support.
1. Foot and or Ankle pain or fatigue with ice skating.
2. Weak crossovers.
3. Difficulty making a turn.
4. Knee and or Low Back pain or fatigue while skating.
5. Chronic fatigue or pain directly after skating.

A hockey ice skate orthotic should allow greater control with turning and crossovers. Usually, persons with ice skate arch support orthotics notice longer stride length and more explosive leg power. Ice skate orthotics should be thin for ease of placement, 3/4 length for toe room, semi rigid for control and adjustable for modifications. The best place for a hockey orthotic is under the skate’s insole for comfort, control and proper placement.

A heat moldable, direct contact orthotic from Atlas Biomechanics achieves all the above goals. It is only 1.3mm thick, fabricated with just a hot water bath, heat gun or toaster oven. Duplicate a lab built custom orthotic in less than 10 minutes.

Some Benefits of Our Heat Moldable Orthotics
*3/4 semi rigid sport orthotic shell.
*12mm heel cup for added control
*Medium profile (Sport Orthotic) to fit in most ice skates, gym, and casual shoes.
*1.3 mm thin. *Completely heat moldable and reheat formable.
*Proprietary material used to ease of mold.
*Total custom contact fit.

Teri Green
Atlas Biomechanics

Saturday, July 16, 2016

Cork Adjustable Heel Lift with built in Varus/Valgus Heel Wedge

A totally new type of Heel Lift. Atlas Biomechanics developed and manufactures the only cork adjustable heel lift with a varus or valgus heel wedge built into the device. We are the only ones producing such a lift. Atlas Biomechanics produces these in the USA. They are a total of 9 mm, 3/8 inches heel lift. Each 3 mm (1/8 inch) layers are peelable.

Adjustable Heel Lift with varus or valgus heel wedge
*Three removable 3 mm (1/8 inch) rubber cork layers.
*Each layer is peelable to achieve the proper correction of limb length discrepancy.
*1/2 of the bottom layer can be peeled for varus or valgus correction.
Helps prevent pronation of the Subtalar Joint of the short limb.
Most short limbs will have an inverted calcaneus, our heel lift brings the ground to the foot.
More stabilizing foundation to the short limb.
Easily fabricate either a Varus Heel Wedge or Valgus Heel Wedge
Sizes: Small: women 4-7 Medium: women 8-10, men 7-9 Large: women 9-11, men 10-14

cork adjustable heel lift

Teri Green

Atlas Biomechanics

Thursday, October 31, 2013

Morton's Neuroma Treated With Metatarsal Foot Pads

A Morton's neuroma is a pinched nerve in the ball of the foot. It occurs especially in woman who wear high heels or tight shoes. Metatarsal foot pads can relieve the pain and treat Morton's Neuroma. The pinched nerve is usually in between the third and fourth metatarsal bones. Where the nerve splits to go to the toes is where the nerve get pinched between the bones. When the nerve is irritated and inflamed, the nerve tries to protect itself by growing scar tissue around itself. Unfortunately this just makes the nerve wider and it gets pinched more often. Shoe's that are narrow and have heels can accelerate the development of the Morton's Neuroma.



There are several ways to treat a Morton's neuroma. Some of the more common ways are wider shoes, lower heels, ice, NSAIDs, cortisone injection, orthotics and surgery. One of the easiest and least expensive ways to treat a Morton's Neuroma  is often the most overlooked. It is the simple metatarsal pad. This foot pad comes in felt, foam or gel. One places the metatarsal pad just below (or proximal) to where the MPJ (or ball of the foot). This placement off loads the Morton's neuroma to allow healing and relief. Metatarsal pads come in adhesive or built into an elastic sleeve.  Some patients or doctors call it a Morton's neuroma pad. So here we see how a metatarsal pad can treat Morton's neuroma.

Teri Green
Atlas Biomechanics  

Tuesday, October 29, 2013

Prevent Painful Hammertoe Corns with Foam Toe Separators

3 layer foam toe separators are simple, inexpensive medical devices designed to cushion and protect crooked toes and corn in between toes.

A foam toe separator can help prevent painful corns between toes. A corn between toes is called a soft corn. The reason it is called a soft corn is because the dead skin of the corn absorbs moisture and becomes macerated or wet. Soft corns occur when two knuckles (the joints) of crooked toes (hammertoes) rub against one another and cause irritation. This irritation of the skin over the joint causes the skin to grow faster. Unfortunately this does not make it better, it develops into a soft corn. Over time, soft corns can even break down to blisters or ulcers.

Toe Separators are medical cushions that help prevent and treat painful toe corns on the feet. Toe separators come in different materials. The most popular material for a toe separator is the foam toe separator. The three layer foam toe separator will help realign crooked digits and prevent the rubbing friction of the toes. Another common use for the 3 layer foam toe separator is for bunions. These foot pads can help hold the misaligned big toe in bunions in place preventing it from rubbing the second digit.

This simple and inexpensive three layer foam toe separator is designed to cushion, realign and prevent rubbing of the toes that cause soft corns.  Our 3 layered foam toe separators have extra padding to allow air flow to the digits. They protect toes from corns, bunions, blisters, overlapping toes, rubbing and hammertoes. Toe separators realign crooked toes, straighten out Big Toe in Bunions, Corns in between Toes. They are Re-usable, Washable

Teri Green
Atlas Biomechanics 

Monday, October 14, 2013

Corn Pads can Prevent Painful Soft Corns

Corn pads can help prevent the pain of soft corns. Soft corns are thickened skin between toes. They usually occur when there is either a crooked hammertoe or a boney spur on a knuckle. If there is excessive friction or pressure on a toe knuckle by another one then the pinched skin will grow more skin to protect itself. But this protection process over does it and a thickened skin or soft corn occurs. The reason it is called a soft corn is because when the corn is in between toes, moisture from sweat gets absorbed by the skin. The corn actually becomes soft, but still painfully.

Corn pads are inexpensive foot pads that are either adhesive felt, adhesive foam or reusable gel. These corn pads off load the pressure and friction on the toe joint preventing the built up of the soft corn.

Teri Green
Atlas Biomechanics

about Atlas Biomechanics: we are a woman owned sports medical manufacturer of Foot Pads, Heel Lifts and Heat Mold Orthotics.

Tuesday, October 1, 2013

Budin Splint to Treat and Realign Painful Hammertoes

A Budin Splint is a medical device used to realign and treat painful hammertoes. Budin splints are also called hammertoe regulators and hammertoe straighteners. They are basicly a metatarsal pad with an adjustable elastic band. The band goes over the contracted digit and helps realign it. The cushioned base off loads the painful ball of foot. Over time when wearing the Budin splint a crooked hammertoe should slowly straighten.

Budin Splints have been around for decades due to the successful nature of its design. Atlas Biomechanics' Budin Splint are made in the USA and are composed of medical grade materials. The splint elastic band should not feel tight and should be place as far back on the digit as possible. Budin splints are also used as post-op hammertoe surgery splints to maintain the toe's correction. Never wear the hammertoe straightener if the pain gets worse.

Teri Green
Atlas Biomechanics