Tuesday, June 13, 2017

Heel Lifts in Ice Skates

Some ice skaters have the sensation that their heels are lifting out of their skates and the general feeling that it does not fit properly. A heel that is pistoning in the skate can cause undo pressure on the forefoot. This will also improper energy transfer on the ice skate.

One of the simplest correction of a heel lifting in the ice skate is to add a cork heel lift. The most common heel lift used is the Atlas Biomechanics 3mm (1/8") cork heel lift. The 6mm (1/4") cork heel lift could also be used for more severe cases.

Usually, the 3 mm ( 1/8 inch ) cork heel lift is placed under the ski boot's insole. They also can be stacked for a higher correction. This will cause the best alignment. This will allow the heel lift to sit firmly at the bottom of the ski boot for optimum control and comfort.

Teri Green

Saturday, May 20, 2017

Steel Shank Shoe Inserts for Forefoot Injuries

Steel full stabilizer plate rigid insoles, half-length, and full length are used to stiffen the shoe's insole. This will limit the range of motion of the forefoot and midfoot. Doing so will make the shoe non-flexible. These steel shank shoe inserts (either 1/2 or full length) will limit the dorsiflexion at the metatarsal joints. Immobilizing the forefoot and metatarsal joints prevent the joints from bending during walking and sports. They can also be used for puncture resistant insoles.

Atlas Biomechanics produces two types of steel shank shoe inserts.

1.  Steel 1/2 Stabilizer Plate Rigid Insoles, Half Length

2.  Steel Stabilizer Plates Insoles, Full Length

Stabilizer / Insole Plates to Limit Fore-Foot, Metatarsal Joints & Turf Toe

-Used to stiffen the sole of the shoe.
-Limits Range of Motion of the Forefoot and Midfoot.
-Makes shoe Non-Flexible.
-Extremely thin steel stabilizer plate insole, 1/8" thick.
-Comfortable and durable felt top cover.
-These steel insole plates are constructed to Limit Dorsiflexion at the metatarsal joints.
-Immobilizes toe joint to prevent it from bending during walking and sports.
-Puncture resistant insole

Indications of the Spring Steel Insoles- 1/2 Steel Stabilizer Plates
1- Problems requiring a Rigid or Semi-Rigid footbed
2- Turf Toe
3- Hallux Limitus / Hallux Rigidus
4- Forefoot Pain
5- Metatarsalgia
6- Cuboid Syndrome
7- Freiburg's Infraction
8- Bunionectomy
9- Foot Stability Post-op
10- Shin Splints
11-Plantar Plate Tear

Steel 1/2 stabilizer plate rigid insoles, half-length, and full length are used to stiffen the shoe's insole.

About Atlas Biomechanics: We are a woman owned sports medical manufacturer of Foot Pads, Heel Lifts and Heat Moldable Orthotics.

Teri Green
Atlas Biomechanics

Thursday, April 13, 2017

6mm ( 1/4" ) Heel Lift is the Most Prescribed Shoe Lift for Achilles Tendonitis in 2019

 Achilles tendonitis is frequently treated with in shoe heel lifts. Per our survey with Atlas Biomechanics prescribing practitioners, the 6 mm ( 1/4") heel lift is the most prescribed for their patients in 2019.

Achilles tendonitis is a painful inflammation of the tendon that attaches to the calcaneus ( heel bone). One of the most common and least expensive treatment options is to put a heel lift in the back of the shoe. Putting a heel lift in the shoe will raise the heel bone to decrease the stretch on the Achilles tendon. It will allow the Achilles tendon to relax and heal faster.

A 6 mm ( 1/4 inch ) heel lift will raise the heel just enough to relax the Achilles tendon to allow healing.



Atlas Biomechanics produces two types of 6 mm ( 1/4" ) heel lifts.

1. Cork Heel Lift

2. EVA/Rubber Heel Lift

These heel lifts are produced here in the USA. They come with double sided tape to allow better application.

For Best Alignment and Optimum Control:

1. Place under the shoe's insole.
2. Make sure they are against the back of the shoe.
3. Heel Lifts are firm but will soften with use.


Teri Green
Atlas Biomechanics

6mm ( 1/4" ) Heel Lift is the Most Prescribed Shoe Lift for Achilles Tendonitis

Achilles tendonitis is frequently treated with heel lifts. Per our in-house survey with Atlas Biomechanics prescribing in shoe heel lifts, the 6mm (1/4") heel lift is most dispensed.

For Achilles Tendonitis

10% 3mm ( 1/8" ) Heel Lift
65% 6mm ( 1/4" ) Heel Lift
20% 9mm ( 3/8" ) Heel Lift
5%  12mm ( 1/2" ) Heel Lift

Cork heel lifts are dispensed over our EVA/Rubber lifts 60% to 40%
Number of Respondents: 418

The Achilles Tendon is the largest tendon in the body. It starts as the calf muscle and ends in the posterior calcaneus. When it is inflamed, one of the most common and least expensive treatment is to place a heel lift in the shoe to shorten the Achilles Tendon.



Teri Green
Atlas Biomechanics

About Atlas Biomechanics: We are a woman owned sports medical manufacturer of Heel Lifts, Foot Pads and Heat Moldable Orthotics.

Sunday, March 19, 2017

Cork 12mm (1/2") Heel Lifts

Cork 12mm (1/2") heel lifts were designed to correct limb length discrepancy. Atlas Biomechanics is the only USA company manufacturing rubber cork blend 12mm (1/2 inch) heel lifts.

Professional Grade Cork Heel Lifts
*10 lifts bulk pack
*12mm (1/2 inch) rubber cork shoe heel lift
*Comfortable natural rubber cork base
*Long lasting
*Made in the USA by Atlas Biomechanics

Sizes: Small 2" (5.1cm) width, Medium 2 1/2" (6.4cm) width, Large 3" (7.4cm) width

12mm (1/2") Cork Heel Lifts Treat;

-Unequal Limb Length
-Post-Hip Replacement Surgery
-Post Knee Replacement Surgery
-Achilles Tendonitis


Teri Green
Atlas Biomechanics

Monday, February 20, 2017

Steel 1/2 Stabilizer Plate Rigid Insoles, Half Length

Steel 1/2 Stabilizer Plate Rigid Insoles, Half Length

Stabilizer / Insole Plates to Limit Fore-Foot, Metatarsal Joints & Turf Toe

Used to stiffen the sole of the shoe.
Limits Range of Motion of the Forefoot and Midfoot.
Makes shoe Non-Flexible.
Extremely thin steel stabilizer plate insole, 1/8" thick.
Comfortable and durable felt top cover.
These steel insole plates are constructed to Limit Dorsiflexion at the metatarsal joints.
Immobilizes toe joint to prevent it from bending during walking and sports.

Indications of the Spring Steel Insoles- 1/2 Steel Stabilizer Plates
- Problems requiring a Rigid or Semi-Rigid foot bed
-Toe Fracture
- Turf Toe
- Hallux Limitus / Hallux Rigidus
- Forefoot Pain
- Metatarsalgia
- Cuboid Syndrome
- Freiburg's Infraction
- Bunionectomy
- Foot Stability Post-op
- Shin Splints
-Plantar Plate Tear
-Morton's Toe

Teri Green
Atlas Biomechanics

About Atlas Biomechanics: We are a woman owned sports medical manufacturer of Foot Pads, Heel Lifts and Heat Moldable Orthotics.

Wednesday, January 25, 2017

Carboplast Carbon Stabilizer / Insole Plates to Limit Fore-Foot, Mid-Foot Metatarsal Joints & Turf Toe

Carbon Stabilizer Plates Insoles, Full Length



Carboplast Stabilizer / Insole Plates to Limit Fore-Foot, Mid-Foot Metatarsal Joints & Turf Toe

Used to stiffen the sole of the shoe.
Limits Range of Motion of the Forefoot and Midfoot.
Makes shoe Non-Flexible.
Extremely thin carbon stabilizer plate insole, 1/8" thick.
These carbon insole plates are constructed to Limit Dorsiflexion at the metatarsal joints and mid-foot .
Immobilizes toe joints to prevent it from bending during walking and sports.
Puncture resistant

Indications of the Carbon Insoles- Full Stabilizer Plates
- Problems requiring a Rigid or Semi-Rigid foot bed
- Turf Toe
- Hallux Limitus / Hallux Rigidus
- Forefoot Pain
- Metatarsalgia
- Cuboid Syndrome
- Freiburg's Infraction
- Bunionectomy
- Foot Stability Post-op
- Shin Splints
-Foot Fractures

Carboplast plates are easy to fit and finish and can be customized by grinding or heat molding. They can be heated and reformed by using convection ovens at a temperature of 400 degrees , F for 3-7 minutes.



Teri Green
Atlas Biomechanics