Showing posts with label heel lift. Show all posts
Showing posts with label heel lift. Show all posts

Thursday, January 15, 2026

Measure Your Own Limb Length Discrepancy at Home

 Do you feel like your belt is always slightly tilted? Do you notice that one pant leg consistently frays at the heel while the other stays clean? Or perhaps you experience chronic lower back pain that only seems to strike on one side? How about hip, knee or ankle pain only on one side?

You might be dealing with a Limb Length Discrepancy (LLD). While many people have a slight difference in leg length, a discrepancy of more than 3mm to 10mm can lead to compensatory pain in the hips, knees, and spine. That’s were heel lift in your shoe may make a huge difference.


While a professional scan (like an X-ray or EOS scan) is the only way to get a definitive measurement, you can perform a preliminary check at home using these three simple methods.

Before You Start: Understanding “Functional” vs. “Structural”

Before grabbing your tape measure, it is important to know there are two types of LLD:


Structural: The actual bone (femur or tibia) is shorter.

Functional: The bones are equal, but a pelvic tilt or muscular imbalance makes one leg appear shorter.1

Method 1: The “Level Pelvis” Mirror Test

This is the easiest visual check and requires only a full-length mirror and a stiff, flat object (like a hardcover book or a clipboard).


Strip down to your underwear and stand in front of a mirror on a hard, level floor (no carpet).

Find your “hip bones” (the Anterior Superior Iliac Spine). These are the bony protrusions at the very front of your pelvis.

Place the book/level across both bones. If the book is perfectly horizontal, your legs are likely even. If the book tilts to one side, that side is likely the shorter limb.

The “Shim” Test: If you see a tilt, place thin magazines or floor tiles under the foot of the “short” side until the book becomes level. Measure the height of the magazines—this is a rough estimate of your discrepancy.

Method 2: The Tape Measure Technique

For this method, you will need a friend to help, as it’s nearly impossible to get an accurate reading while bending over.


Lie flat on your back on a firm surface.

Bridge up: Lift your hips off the ground, then set them back down. This “resets” the pelvis. Have your friend gently pull on both ankles to ensure you are straight.

Measure from Hip to Ankle: Have your friend measure from the bony point of your hip (the ASIS mentioned above) to the inner ankle bone (medial malleolus).

Compare: Write down the measurement for both sides. A difference of $1/4$ inch ($~6mm$) or more is usually considered clinically significant.

Method 3: The “Wear Pattern” Audit

Sometimes your gear tells the story your eyes miss. Lay out your most-worn items:


Shoes: Look at the outsoles. Does one shoe show significantly more wear on the heel or the outer edge than the other?

Jeans: Check the hems. Is one side tattered while the other is pristine?

The “Seam” Test: Put on a pair of leggings or trousers with a clear side seam. Stand straight and see if the seams line up evenly at the ankles.

Home measurements are excellent for identifying a potential problem, but they are prone to human error. If you find a discrepancy:

Do not immediately buy a large heel lift. Sudden corrections to the short leg can shock your spine.

Consult a professional. A medical professional can determine if the issue is structural (requiring a lift) or functional (requiring stretching and realigning).

Atlas Biomechanics is a USA based manufacturer of Heel Lifts. The most prescribed heel lift in the USA.


Saturday, January 27, 2024

How Heel Lifts Treat Achilles Tendoinitis

 Heel lifts can be a part of the treatment plan for Achilles tendonitis, but it's essential to note that they are just one component of a comprehensive approach. Achilles tendonitis requires a multi-faceted treatment strategy that typically involves rest, stretching, strengthening exercises, footwear adjustments, and sometimes medical interventions like physical therapy or even surgery in severe cases. Here's how you can incorporate heel lifts into the treatment plan:



Consultation with a Healthcare Professional: Before starting any treatment, it's crucial to get an accurate diagnosis from a healthcare professional. They can evaluate the extent of your Achilles tendonitis and recommend the appropriate treatment plan.

Understanding Heel Lifts: Heel lifts are inserts placed inside your shoes to elevate the heel slightly. They help reduce strain on the Achilles tendon by reducing the amount of stretch it experiences with each step.

Choosing the Right Heel Lifts: There are different types of heel lifts available, including over-the-counter inserts and custom-made orthotics. Your healthcare professional can advise you on the best type for your condition. The most common heel lift height to treat Achilles tendonitis is 6mm ( 1/4").

Gradual Adjustment: When you start using heel lifts, it's essential to gradually adjust to them. Begin by wearing them for short periods, and then gradually increase the duration as your comfort level improves.

Proper Footwear: Heel lifts work best when used in conjunction with supportive footwear. Choose shoes with good arch support and cushioning to further reduce strain on the Achilles tendon. Place the heel lift under the shoe's insole so it sits firmly. 

Stretching and Strengthening Exercises: Alongside heel lifts, it's crucial to incorporate stretching and strengthening exercises into your routine. Calf stretches and eccentric heel drop exercises can help improve flexibility and strength in the Achilles tendon and calf muscles.

Rest and Ice: Rest is crucial for allowing the Achilles tendon to heal. Ice packs can help reduce inflammation and pain. Apply ice to the affected area for 15-20 minutes several times a day, especially after activities that aggravate the tendonitis.

Monitor Progress: Keep track of your symptoms and progress over time. If you experience persistent pain or if your symptoms worsen, consult your healthcare professional for further evaluation and treatment adjustments. As the Achilles tendonitis starts to feel improved, many health professionals will dispense a shorter heel lift. If started with a 6 mm ( 1/4" ) lift, then switch out to a 3 mm ( 1/8" ) heel lift.

Remember, Achilles tendonitis can take time to heal, and it's essential to be patient and consistent with your treatment plan. Additionally, if you experience severe or persistent pain, consult your healthcare professional for personalized guidance and treatment recommendations.

Atlas Biomechanics manufactures heel lifts in heights of 3 mm ( 1/8" ), 6 mm ( 1/4" ), 9 mm ( 3/8" ) and 12 mm ( 1/2" ). 

Teri Green

Atlas Biomechanics

Sunday, September 24, 2023

Why Medical Professionals Should Use Heel Lifts In Their Practice?

Medical Professionals may recommend heel lifts as part of their treatment plan for certain patients based on individual assessments and specific clinical indications. Here are some reasons why chiropractors might suggest the use of heel lifts:



Leg Length Discrepancy (LLD): Heel lifts can be used to address a limb length discrepancy, this is where one leg is shorter than the other. LLD can lead to musculoskeletal imbalances, spinal misalignments, and postural issues. By placing a heel lift under the shorter leg, practitioners aim to level the pelvis and spine, which can alleviate associated pain and discomfort.

Pelvic Tilt and Postural Correction: Heel lifts can help correct pelvic tilts and imbalances in the musculoskeletal system. Heel lifts to address conditions like anterior pelvic tilt or pelvic obliquity, which can contribute to lower back pain and poor posture.

Foot and Ankle Conditions: Patients with foot and ankle conditions, such as Achilles tendonitis, plantar fasciitis, or overpronation, may benefit from heel lifts. These lifts can help reduce strain on the affected areas, promote proper alignment, and alleviate pain.

Spinal Misalignments: Chiropractors focus on spinal health, and sometimes, spinal misalignments can be influenced by leg length discrepancies or postural issues. By addressing these underlying problems with heel lifts, chiropractors aim to enhance the effectiveness of spinal adjustments and promote long-term spinal health.

Symptom Relief: Heel lifts may be recommended to provide short-term relief from various musculoskeletal conditions. They can help reduce pain, discomfort, and fatigue associated with walking or standing for extended periods.

Sports Performance: Athletes with specific biomechanical issues may benefit from heel lifts to optimize their performance and reduce the risk of injuries. Medical professionals can assess an athlete's gait and biomechanics to determine if heel lifts are appropriate.

Orthopedic Issues: In conjunction with orthopedic specialists in some cases. Heel lifts may be part of a broader orthopedic treatment plan to address structural abnormalities or assist in post-surgical rehabilitation. Examples are post hip or knee replacement surgery.

It's important to note that heel lifts should only be recommended and prescribed by qualified healthcare professionals, after a thorough evaluation of the patient's condition. The use of heel lifts should be tailored to the individual's needs, and they should be fitted properly to ensure they do not cause further issues or discomfort. Additionally, heel lifts are just one component of a comprehensive treatment plan to address the root causes of musculoskeletal problems.

Atlas Biomechanics manufactures heel lifts in cork and eva/rubber. Heights are 3mm ( 1/8 inch ), 6mm ( 1/4 inch ), 9mm ( 3/8 inch ) and 12mm ( 1/2 inch ). 

Teri Green

Atlas Biomechanics

Tuesday, September 14, 2021

Atlas Biomechanics : Short Leg Syndrome (Unequal Limb Length) Biomechanics

Atlas Biomechanics : Short Leg Syndrome (Unequal Limb Length) Biomechanics:  Unequal limb length is a common condition seen in medical offices. A proper understanding of unequal leg length biomechanics will help the ...

Short Leg Syndrome (Unequal Limb Length) Biomechanics

 Unequal limb length is a common condition seen in medical offices. A proper understanding of unequal leg length biomechanics will help the medical practitioner to diagnosis short leg syndrome. A patient may not know that one leg is shorter than the other. They can present with other complaints that lead to this diagnosis. The presence of limb length discrepancy is usually associated with pelvic or lumbar misalignment. The short leg may be FUNCTIONAL, ANATOMICAL, or a COMBO of both.


Studies have found that the majority of patients presenting to our offices are functional, but a growing number seen are anatomical. This is the result of post hip or knee replacement surgeries. Many of these can be corrected with a simple shoe heel lift. You will need an understanding of unequal limb length biomechanics before prescribing a heel lift from Atlas Biomechanics.




FUNCTIONAL SHORT LEG:

1. The sacroiliac joint that is misaligned causing the sacral base to drop to one side.

2. Flexion or Extension with one of the iliac bones out of its normal anatomical position.

3. Posterior Tibial Tendon Dysfunction causing the subtalar joint to overpronate, effectively shorting the leg.


ANATOMICAL SHORT LEG:

1. Hip or knee replacement surgery.

2. Polio.

3. Congenital, birth injuries and infections to the growth plates.

4. Fractures, especially ones at the growth plate.


BIOMECHANICS OF THE SHORT LEG:

1. Supination of the subtalar joint.

2. External rotation of the tibia.

3. External rotation of the knee.

4. Abnormal patella tracking.

5. Pelvic Tilt.

6. Shifting of the center of gravity to the short side.


BIOMECHANICS OF THE LONG LEG:

1. Pronation of the subtalar joint.

2. Internal rotation of the tibia and the knee.

3. Abnormal patella tracking.

4. Vaulting over the hip joint.


GAIT EVALUATION OF THE UNEQUAL LEG LENGTH:

1. Center of gravity shifted to the short side.

2. Unilateral early heel lift.

3. Pelvic Tilt.

4. Shoulder drop.

5. Unilateral subtalar pronation.

6. Unilateral shoe wear (lateral heel).

7. Abnormal knee rotation and patella tracking.


Shoe Heel Lifts manufactured by Atlas Biomechanics come as either EVA/Rubber heel lift or Cork/Rubber blend heel lift.


Heights are 3mm (1/8"), 6mm (1/4"), 9mm (3/8") or 12mm (1/2")


Teri Green

Atlas Biomechanics


About Atlas Biomechanics: We are a woman owned sports medical manufacturer of heel lifts, foot pads and heat mold orthotics.




Sunday, October 25, 2020

Heel Lifts for Unequal Limb Length in Polio Patients

 Polio patients usually have a short leg and or scoliosis that can be treated with a common in shoe heel lift. This leg length discrepancy is permanent. Polio patients commonly will have lower back pain, hip, knee, and ankle pain due to the unequal leg length (short leg). Medical providers can easily treat the patient’s discomfort with a simple shoe heel lift. Usually, a heel lift that is dispensed is about 1/4 the limb length discrepancy. The proper height depends on the patient’s comfort level and how long they have had the short limb.



In shoe heel lifts are placed on the short limb side underneath the shoe’s insole. This allows the heel lift to sit firmly at the bottom of the shoe. Optimum control and comfort to the patient is then achieved. In shoe heel lifts can be manufactured from cork and EVA/rubber blend. They come in different heights to correct the leg discrepancy.

Atlas Biomechanics produces in shoe heel lifts here in the USA from medical grade rubber/cork and eva/rubber. They come in heights of 1/8″ (3mm) heel lift, 1/4″ (6mm) heel lift, 3/8″ (9mm) heel lift and 1/2″ (12mm) heel lift. An adjustable heel lift, that allows the heel riser to properly fit the short leg is a common type for polio patients. The 1/4″ heel lift is our most popular short leg lift for polio patients.


Teri Green

Atlas Biomechanics

About Atlas Biomechanics: We are a woman-owned sports medical manufacturer of heel lifts, foot pads, and heat mold orthotics.


Sunday, October 4, 2020

Atlas Biomechanics : 2020 Heel Lift Study For Post Hip/Knee Replacement...

Atlas Biomechanics : 2020 Heel Lift Study For Post Hip/Knee Replacement...: Heel Lift Study For Post Hip and Knee Replacement Surgery Patients Heel lifts have been used in post hip and knee replacement surgery patien...

2020 Heel Lift Study For Post Hip/Knee Replacement Surgery Patients

Heel Lift Study For Post Hip and Knee Replacement Surgery Patients


Heel lifts have been used in post hip and knee replacement surgery patients ever since the surgeries’ beginnings. Atlas Biomechanics' 2020 unscientific survey is from our practitioners who dispense our heel lifts.  Here are the results from the survey. Over 382 health care practitioners who dispense Atlas Biomechanics’ heel lifts responded to our survey request.




1) Practitioners dispensing heel lifts post hip replacement surgery.


Orthopedic Surgeons 35%, Physical Therapists 28%, Chiropractors 22%, Podiatrists 8%, Others 7%


2) Heel height discrepancy found.


9 mm heel height discrepancy 42%

6 mm heel height discrepancy 35%

12 mm heel height discrepancy 11%

3 mm heel height discrepancy 8%

Others 4%


3) Most common complaints of patients with leg length discrepancy post hip replacement surgery.


lower back pain 33%

knee pain 32%

unsteady gait 20%

ankle pain 10%

others 4%


4) Most common heel lift height dispensed


6 mm heel lift 34%

12 mm heel lift 22%

3 mm heel lift 23%

 9 mm heel lift 21%


Thank you to all of our practitioners who completed our survey and who use our heel lifts.


Teri Green

Atlas Biomechanics


About Atlas Biomechanics: We are a sports medical manufacturer of Heel Lifts, Foot Pads, and Heat Moldable Orthotics. Heel Lifts produced are 3, 6, 9 and 12 mm heights. We also produce cork lifts and adjustable heel lifts.


Wednesday, August 5, 2020

Atlas Biomechanics : Gait and Heel Lifts

Atlas Biomechanics : Gait and Heel Lifts: For efficient locomotion, a symmetrical and well aligned body is essential. When the pelvis is tilted by leg length discrepancies, gravitati...

Gait and Heel Lifts

For efficient locomotion, a symmetrical and well aligned body is essential. When the pelvis is tilted by leg length discrepancies, gravitational forces weaken the SI joint and pelvic ligaments. These structures find themselves trying to maintain structural balance. Left untreated, many of these symptoms appear as the short leg destabilizes the pelvis by unleveling the sacral base. Painful lumbar compensations often travel all the way up through the atlantooccipital joint, as the spinal column is forced to rotate and accommodate the uneven sacral base.



A proper fitted heel lift can allivate many of these symptoms.

Atlas Biomechanics manufactures orthopedic heel lifts in corrects of 1/8", 1/4", 3/8" and 1/2". We also produce cork/rubber and EVA/rubber shoe lifts. Our adjustable heel lifts come with a built in varus or valgus heel wedge.

Teri Green

Sunday, July 19, 2020

Thursday, May 14, 2020

Atlas Biomechanics : Effects of Limb Length Discrepancy on Spinal Motio...

Atlas Biomechanics : Effects of Limb Length Discrepancy on Spinal Motio...: There was a study in Japan to evaluate the effect of limb length discrepancy on the changes in curvature of the normal spine during gait. Th...

Effects of Limb Length Discrepancy on Spinal Motion During Gait

There was a study in Japan to evaluate the effect of limb length discrepancy on the changes in curvature of the normal spine during gait. The researchers raised the heel of healthy volunteers to simulate limb length inequality. Their results showed an asymmetrical lateral bending motion during heel raising gait as compensation for the leg length discrepancy. Lateral bending of the thoracic spine was 4.2 degrees in heel raising gait and only 3 degrees in normal gait. Lateral bending angle of the lumbar spine was 8.1 in heel raising gait and only 6.1 degrees in normal gait. Their conclusion is that patients who have leg length discrepancy are at greater risk of developing disabling spinal disorders due to exaggerated degenerative change. They state that heel lifts may be helpful in treating leg length discrepancy. Spine2003Nov1;28(21):2472-6.

Atlas Biomechanics manufactures heel lifts from medical grade rubber cork and eva/rubber blends. We also product adjustable heel lifts and shoe lifts in 1/8", 1/4", 3/8" and 1/2" heights.

Teri Green
Atlas Biomechanics

Wednesday, November 13, 2019

Monday, December 17, 2018

Atlas Biomechanics : Unequal Leg Length in Polio Patients Treated with ...

Atlas Biomechanics : Unequal Leg Length in Polio Patients Treated with ...: Polio patients commonly have a short leg and or scoliosis that can be treated with a heel lift. This limb length discrepancy is permanent. M...

Unequal Leg Length in Polio Patients Treated with Heel Lifts

Polio patients commonly have a short leg and or scoliosis that can be treated with a heel lift. This limb length discrepancy is permanent. Many post-polio patients will have lower back pain, hip, knee, and ankle pain due to the unequal limb length. Physicians can easily treat the patient's discomfort with a simple heel lift. Usually, a heel lift that is dispensed is about 1/2 the limb length discrepancy. The proper height depends on the patient's comfort level and how long they have had the short limb.



Heel lifts are placed on the short leg side underneath the shoe's insole. This allows the heel lift to sit firmly at the bottom of the shoe. This provides optimum control and comfort to the patient. In shoe heel lifts can be manufactured from cork and EVA/rubber blend. They come in different heights to correct the limb discrepancy. 

Atlas Biomechanics manufacturers heel lifts here in the USA from medical grade cork and eva/rubber. They come in heights of 1/8" (3mm) heel lift, 1/4" (6mm) heel lift, 3/8" (9mm) heel lift and 1/2" (12mm) heel lift. An adjustable heel lift, that allows the heel riser to properly fit the short leg is a common type for polio patients.  The 1/4" heel lift is our most popular short leg lift for polio patients.

Teri Green
Atlas Biomechanics

About Atlas Biomechanics: We are a woman-owned sports medical manufacturer of heel lifts, foot pads, and heat mold orthotics.