Showing posts with label short leg. Show all posts
Showing posts with label short leg. Show all posts

Thursday, January 15, 2026

Measure Your Own Limb Length Discrepancy at Home

 Do you feel like your belt is always slightly tilted? Do you notice that one pant leg consistently frays at the heel while the other stays clean? Or perhaps you experience chronic lower back pain that only seems to strike on one side? How about hip, knee or ankle pain only on one side?

You might be dealing with a Limb Length Discrepancy (LLD). While many people have a slight difference in leg length, a discrepancy of more than 3mm to 10mm can lead to compensatory pain in the hips, knees, and spine. That’s were heel lift in your shoe may make a huge difference.


While a professional scan (like an X-ray or EOS scan) is the only way to get a definitive measurement, you can perform a preliminary check at home using these three simple methods.

Before You Start: Understanding “Functional” vs. “Structural”

Before grabbing your tape measure, it is important to know there are two types of LLD:


Structural: The actual bone (femur or tibia) is shorter.

Functional: The bones are equal, but a pelvic tilt or muscular imbalance makes one leg appear shorter.1

Method 1: The “Level Pelvis” Mirror Test

This is the easiest visual check and requires only a full-length mirror and a stiff, flat object (like a hardcover book or a clipboard).


Strip down to your underwear and stand in front of a mirror on a hard, level floor (no carpet).

Find your “hip bones” (the Anterior Superior Iliac Spine). These are the bony protrusions at the very front of your pelvis.

Place the book/level across both bones. If the book is perfectly horizontal, your legs are likely even. If the book tilts to one side, that side is likely the shorter limb.

The “Shim” Test: If you see a tilt, place thin magazines or floor tiles under the foot of the “short” side until the book becomes level. Measure the height of the magazines—this is a rough estimate of your discrepancy.

Method 2: The Tape Measure Technique

For this method, you will need a friend to help, as it’s nearly impossible to get an accurate reading while bending over.


Lie flat on your back on a firm surface.

Bridge up: Lift your hips off the ground, then set them back down. This “resets” the pelvis. Have your friend gently pull on both ankles to ensure you are straight.

Measure from Hip to Ankle: Have your friend measure from the bony point of your hip (the ASIS mentioned above) to the inner ankle bone (medial malleolus).

Compare: Write down the measurement for both sides. A difference of $1/4$ inch ($~6mm$) or more is usually considered clinically significant.

Method 3: The “Wear Pattern” Audit

Sometimes your gear tells the story your eyes miss. Lay out your most-worn items:


Shoes: Look at the outsoles. Does one shoe show significantly more wear on the heel or the outer edge than the other?

Jeans: Check the hems. Is one side tattered while the other is pristine?

The “Seam” Test: Put on a pair of leggings or trousers with a clear side seam. Stand straight and see if the seams line up evenly at the ankles.

Home measurements are excellent for identifying a potential problem, but they are prone to human error. If you find a discrepancy:

Do not immediately buy a large heel lift. Sudden corrections to the short leg can shock your spine.

Consult a professional. A medical professional can determine if the issue is structural (requiring a lift) or functional (requiring stretching and realigning).

Atlas Biomechanics is a USA based manufacturer of Heel Lifts. The most prescribed heel lift in the USA.


Tuesday, September 14, 2021

Short Leg Syndrome (Unequal Limb Length) Biomechanics

 Unequal limb length is a common condition seen in medical offices. A proper understanding of unequal leg length biomechanics will help the medical practitioner to diagnosis short leg syndrome. A patient may not know that one leg is shorter than the other. They can present with other complaints that lead to this diagnosis. The presence of limb length discrepancy is usually associated with pelvic or lumbar misalignment. The short leg may be FUNCTIONAL, ANATOMICAL, or a COMBO of both.


Studies have found that the majority of patients presenting to our offices are functional, but a growing number seen are anatomical. This is the result of post hip or knee replacement surgeries. Many of these can be corrected with a simple shoe heel lift. You will need an understanding of unequal limb length biomechanics before prescribing a heel lift from Atlas Biomechanics.




FUNCTIONAL SHORT LEG:

1. The sacroiliac joint that is misaligned causing the sacral base to drop to one side.

2. Flexion or Extension with one of the iliac bones out of its normal anatomical position.

3. Posterior Tibial Tendon Dysfunction causing the subtalar joint to overpronate, effectively shorting the leg.


ANATOMICAL SHORT LEG:

1. Hip or knee replacement surgery.

2. Polio.

3. Congenital, birth injuries and infections to the growth plates.

4. Fractures, especially ones at the growth plate.


BIOMECHANICS OF THE SHORT LEG:

1. Supination of the subtalar joint.

2. External rotation of the tibia.

3. External rotation of the knee.

4. Abnormal patella tracking.

5. Pelvic Tilt.

6. Shifting of the center of gravity to the short side.


BIOMECHANICS OF THE LONG LEG:

1. Pronation of the subtalar joint.

2. Internal rotation of the tibia and the knee.

3. Abnormal patella tracking.

4. Vaulting over the hip joint.


GAIT EVALUATION OF THE UNEQUAL LEG LENGTH:

1. Center of gravity shifted to the short side.

2. Unilateral early heel lift.

3. Pelvic Tilt.

4. Shoulder drop.

5. Unilateral subtalar pronation.

6. Unilateral shoe wear (lateral heel).

7. Abnormal knee rotation and patella tracking.


Shoe Heel Lifts manufactured by Atlas Biomechanics come as either EVA/Rubber heel lift or Cork/Rubber blend heel lift.


Heights are 3mm (1/8"), 6mm (1/4"), 9mm (3/8") or 12mm (1/2")


Teri Green

Atlas Biomechanics


About Atlas Biomechanics: We are a woman owned sports medical manufacturer of heel lifts, foot pads and heat mold orthotics.




Sunday, October 25, 2020

Heel Lifts for Unequal Limb Length in Polio Patients

 Polio patients usually have a short leg and or scoliosis that can be treated with a common in shoe heel lift. This leg length discrepancy is permanent. Polio patients commonly will have lower back pain, hip, knee, and ankle pain due to the unequal leg length (short leg). Medical providers can easily treat the patient’s discomfort with a simple shoe heel lift. Usually, a heel lift that is dispensed is about 1/4 the limb length discrepancy. The proper height depends on the patient’s comfort level and how long they have had the short limb.



In shoe heel lifts are placed on the short limb side underneath the shoe’s insole. This allows the heel lift to sit firmly at the bottom of the shoe. Optimum control and comfort to the patient is then achieved. In shoe heel lifts can be manufactured from cork and EVA/rubber blend. They come in different heights to correct the leg discrepancy.

Atlas Biomechanics produces in shoe heel lifts here in the USA from medical grade rubber/cork and eva/rubber. They come in heights of 1/8″ (3mm) heel lift, 1/4″ (6mm) heel lift, 3/8″ (9mm) heel lift and 1/2″ (12mm) heel lift. An adjustable heel lift, that allows the heel riser to properly fit the short leg is a common type for polio patients. The 1/4″ heel lift is our most popular short leg lift for polio patients.


Teri Green

Atlas Biomechanics

About Atlas Biomechanics: We are a woman-owned sports medical manufacturer of heel lifts, foot pads, and heat mold orthotics.


Saturday, October 17, 2020

Cork Adjustable Heel Lift with built in Varus/Valgus Heel Wedge

Atlas Biomechanics has developed a total new type of heel lift. We manufacture the only cork adjustable heel lift with a varus or valgus heel wedge built into the device. This type of adjustable heel lift is more stabilizing to the short leg. We are the only ones producing such an in shoe heel lift.



Atlas Biomechanics Adjustable Heel Lift with varus or valgus heel wedge

*Three removable 3 mm (1/8 inch) rubber cork layers.

*Each layer is peelable to achieve the proper correction of limb length discrepancy.

*1/2 of the bottom layer can be peeled for varus or valgus correction.

The heel wedge part helps prevent pronation of the Subtalar Joint of the short limb.

Most short legs will have an inverted calcaneus, our heel lift brings the ground to the foot.

More stabilizing foundation to the short limb.

Rubber cork is durable, light weight and comfortable.

Easily fabricate either a Varus Heel Wedge or Valgus Heel Wedge.

Sizes: Small: women 4-7 Medium: women 8-10, men 7-9 Large: women 9-11, men 10-14




Teri Green


Atlas Biomechanics


About Atlas Biomechanics: we are a woman owned sports medical manufacturer of Heel Lifts, Foot Pads and Heat Moldable Orthotics.

Sunday, July 19, 2020

Atlas Biomechanics : Abnormal Gait, Short Limb and Heel Lifts

Atlas Biomechanics : Abnormal Gait, Short Limb and Heel Lifts: For efficient gait, a symmetrical and well aligned body is essential. When the pelvis is distorted by leg length discrepancies, gravitationa...

Atlas Biomechanics : Abnormal Gait, Short Limb and Heel Lifts

Atlas Biomechanics : Abnormal Gait, Short Limb and Heel Lifts: For efficient gait, a symmetrical and well aligned body is essential. When the pelvis is distorted by leg length discrepancies, gravitationa...

Abnormal Gait, Short Limb and Heel Lifts

For efficient gait, a symmetrical and well aligned body is essential. When the pelvis is distorted by leg length discrepancies, gravitational forces weaking the SI joint and pelvic ligaments. These structures find themselves trying to maintain structural balance. Left untreated, many symptoms appear as the short limb destabilizes the pelvis by unleveling the sacral base. Painful lumbar compensations often travel all the way up through the atlantooccipital joint, as the spinal column is forced to rotate and accommodate the uneven sacral base.



A proper fitted heel lift can alleviate many of these symptoms. Atlas Biomechanics' heel are produced in rubber/cork and EVA/rubber in 3, 6, 9 and 12 mm. Our most common prescribed height heel lift for a unequal limb length is the 6 mm ( 1/4" ).

Teri Green
Atlas Biomechanics

About Atlas Biomechanics: We are a woman owned sports medical manufacturer of Heel Lifts, Foot Pads and Heat Moldable Orthotics. 


Monday, December 17, 2018

Unequal Leg Length in Polio Patients Treated with Heel Lifts

Polio patients commonly have a short leg and or scoliosis that can be treated with a heel lift. This limb length discrepancy is permanent. Many post-polio patients will have lower back pain, hip, knee, and ankle pain due to the unequal limb length. Physicians can easily treat the patient's discomfort with a simple heel lift. Usually, a heel lift that is dispensed is about 1/2 the limb length discrepancy. The proper height depends on the patient's comfort level and how long they have had the short limb.



Heel lifts are placed on the short leg side underneath the shoe's insole. This allows the heel lift to sit firmly at the bottom of the shoe. This provides optimum control and comfort to the patient. In shoe heel lifts can be manufactured from cork and EVA/rubber blend. They come in different heights to correct the limb discrepancy. 

Atlas Biomechanics manufacturers heel lifts here in the USA from medical grade cork and eva/rubber. They come in heights of 1/8" (3mm) heel lift, 1/4" (6mm) heel lift, 3/8" (9mm) heel lift and 1/2" (12mm) heel lift. An adjustable heel lift, that allows the heel riser to properly fit the short leg is a common type for polio patients.  The 1/4" heel lift is our most popular short leg lift for polio patients.

Teri Green
Atlas Biomechanics

About Atlas Biomechanics: We are a woman-owned sports medical manufacturer of heel lifts, foot pads, and heat mold orthotics.

Thursday, July 5, 2018

Adjustable Heel Lift with built in Heel Wedge

The only adjustable heel lift with a built-in varus or valgus heel wedge. Why have a heel wedge when treating unequal leg length? The short leg will have an inverted (valgus ) calcaneus. Our adjustable heel lift brings the ground up to the foot for a better fit and feel.



 Adjustable Heel Lift with Varus or Valgus heel wedge 
-Three removable 3 mm (1/8 inch) rubber cork layers.
-Each layer is peelable to achieve the proper correction of limb length discrepancy.
-1/2 of the bottom layer can be peeled for varus or valgus correction.
-Helps prevent pronation of the Subtalar Joint of the short limb.
-Most short limbs will have an inverted calcaneus, our heel lift brings the ground to the foot.
-More stabilizing foundation to the short limb.
-Easily fabricate either a Varus Heel Wedge or Valgus Heel Wedge

Sizes: Small: women 4-7 Medium: women 8-10, men 7-9 Large: women 9-11, men 10-14

Teri Green
Atlas Biomechanics

Friday, June 29, 2018

Limb Length Discrepancy Following Total Hip Joint Replacement Surgery Treated With Heel Lifts

Limb lengthening is not uncommon after a total hip replacement and may cause subjective problems for patients. A study of 150 total hip replacements reveals 144 limbs were lengthened. Due to patient complaints, 40 (27%) required a Heel Lift on the unoperated side to gain satisfactory gait pattern. ClinOrthoRelatRes78Jul-Aug;(134):135-8.

Make sure to ask your post-op patients about their gait and dispense proper heel lifts from Atlas Biomechanics after a total hip replacement surgery.


BIOMECHANICS OF THE SHORT LIMB:
1. Supination of the subtalar joint.
2. External rotation of the tibia.
3. External rotation of the knee.
4. Abnormal patella tracking.
5. Pelvic Tilt.
6. Shifting of the center of gravity to the short side.

BIOMECHANICS OF THE LONG LIMB:
1. Pronation of the subtalar joint.
2. Internal rotation of the tibia and the knee.
3. Abnormal patella tracking.
4. Vaulting over the hip joint.

GAIT EVALUATION OF THE UNEQUAL LIMB LENGTH:
1. Center of gravity shifted to the short side.
2. Unilateral early heel lift.
3. Pelvic Tilt.
4. Shoulder drop.
5. Unilateral subtalar pronation.
6. Unilateral shoe wear (lateral heel).
7. Abnormal knee rotation and patella tracking.

Atlas Biomechanics produces a full line of cork and Eva/rubber heel lifts.

Teri Green
Atlas Biomechanics

Friday, June 15, 2018

Functional Short Leg and Heel Lifts

A functional short leg (FSL) is a common type of leg-length inequality is a result of rotational patterns of the pelvis and hips. It can also be affected by misalignments or torsional movement in the knee, ankles, and feet.

Limb Length Discrepancy and Heel Lifts

In many cases of a functional short leg, as evidenced by radiographic study, the use of heel lifts has been shown to help eliminate musculoskeletal deficiencies and improve patient outcomes. Providing support for the short limb with a heel lift is important when recognizing the functional short leg because providing a lift will likely diminish the associated sacroiliac subluxations.

Look at and palpate the iliac crests and the greater trochanters to see if they are of unequal height. Finally, look and palpate the lumbar spine. A typical postural distortion for a short leg will create lumbar scoliosis whose convexity moves toward the side of the FSL.

After you have measured your patient’s actual leg-length discrepancy, it is always safe to under correct. The classic rule of thumb is to cut the LLI in half and then start with the appropriate-sized heel lift.

Proceed to a 3 mm (1/8") heel lift and have the patient wear this for two weeks. Then re-evaluate.
Proceed to a 6 mm (1/4") heel lift or 9 mm (3/8") heel lift only if necessary. Use the two-week break-in period as indicated above. Then re-evaluate.

From a practical standpoint, it is very important to be able to confidently determine if someone truly has a short leg due to anatomy or functionality and to use a heel lift if need be.

Teri Green

Atlas Biomechanics

Thursday, June 7, 2018

SHORT LEG SYNDROME (UNEQUAL LIMB LENGTH) Biomechanics of the Short Limb

The presence of leg length discrepancy is usually associated with pelvic or lumbar misalignment. The short limb may be FUNCTIONAL, ANATOMICAL, or a COMBO of both. Studies have found that the majority of patients presenting to our offices are functional, but a growing number seen are anatomical, the result of post hip or knee replacement surgeries. Many of these can be corrected within shoe heel lifts. You need an understanding of unequal limb length biomechanics before prescribing a heel lift from Atlas Biomechanics.



FUNCTIONAL SHORT Limb:
1. The sacroiliac joint that is misaligned causing the sacral base to drop to one side.
2. Flexion or Extension with one of the iliac bones out of its normal anatomical position.
3. Posterior Tibial Tendon Dysfunction causing the subtalar joint to overpronate, effectively shorting the limb.

ANATOMICAL SHORT Limb:
1. Hip or knee replacement surgery.
2. Polio.
3. Congenital, birth injuries and infections to the growth plates.
4. Fractures.

BIOMECHANICS OF THE SHORT Leg:
1. Supination of the subtalar joint.
2. External rotation of the tibia.
3. External rotation of the knee.
4. Abnormal patella tracking.
5. Pelvic Tilt.
6. Shifting of the center of gravity to the short side.

BIOMECHANICS OF THE LONG LIMB:
1. Pronation of the subtalar joint.
2. Internal rotation of the tibia and the knee.
3. Abnormal patella tracking.
4. Vaulting over the hip joint.

GAIT EVALUATION OF THE UNEQUAL LIMB LENGTH:
1. Center of gravity shifted to the short side.
2. Unilateral early heel lift.
3. Pelvic Tilt.
4. Shoulder drop.
5. Unilateral subtalar pronation.
6. Unilateral shoe wear (lateral heel).
7. Abnormal knee rotation and patella tracking.

Atlas Biomechanics produces all of our heel lifts in the USA.

Shoe Heel Lifts come in small, medium and large. They are manufactured from either EVA/Rubber or Cork/Rubber blend.

Heights are:
1/8 inch (3 mm) heel lift 
1/4 inch (6 mm) heel lift   
3/8 inch (9 mm) heel lift 
1/2 inch (12 mm) heel lift 
and
Adjustable Heel Lift with Built-in Heel Wedge  

Teri Green
Atlas Biomechanics